Remove Gateway NV53 NV54 NV56 NV58 keyboard

Nach unten

Remove Gateway NV53 NV54 NV56 NV58 keyboard

Beitrag  xiang2011 am Mi Mai 30, 2012 12:44 pm

1. Turn off your Gateway NV53 NV54 NV56 NV58, and disconnect the adapter and remove the Gateway laptop battery.

2. Remove three screws securing Gateway Laptop Keyboard cover.

3. Lift up the keyboard cover as it shown on the picture below. Continue separating it from the laptop base with your fingers.

4. Do not lift up the Gateway laptop keyboard cover too much, it’s still connected to the motherboard.
At this point we are not removing the cover, we just move it a little bit away in order to get access to the Gateway NV53 NV54 NV56 NV58 keyboard.

5. Lift up the Gateway Laptop Keyboard and place it upside down on the palmrest.

6. Before removing the Gateway NV53 NV54 NV56 NV58 keyboard, it’s necessary to unlock the connector on the motherboard and release the cable.

On the following picture the laptop keyboard connector shown in the locked state.

To unlock the connector, you’ll have to lift up the left side of the locking tab (brown) so it opens up at a 90 degree angle.

Be very careful, do not break this connector or your keyboard will never work again. Do not apply too much force to the locking tab.

On the following picture the connector shown in the unlocked state.

Now you can pull the Gateway Laptop Keyboard cable from the connector.

7. After the keyboard cable released, you can remove the keyboard. Reverse the procedure, you can install the new keyboard. You can find the new Gateway NV53 NV54 NV56 NV58 keyboard here.


Anzahl der Beiträge : 313
Anmeldedatum : 22.03.11

Benutzerprofil anzeigen

Nach oben Nach unten

Nach oben

Befugnisse in diesem Forum
Sie können in diesem Forum nicht antworten